VERDICT: Angwatt F1
Our editorial rating is based on product testing.
- 1000 W motor can handle even steep hills
- Decent range
- Solid, durable build
- Lower weight and better storage
- Lower price
- The frame sometimes creaks, especially when getting on
- Plastic display is hard to read in direct sunlight
- Confusing display of the remaining battery level
- Inaccurate display of the mileage covered
After Angwatt CS1, a newer model named Angwatt F1 New has made it to our test. The scooters are very similar to each other—so much so that it might seem like they’re almost identical models. At first glance at the specs, it looked that way to us too. However, the newer Angwatt F1 New is cheaper and, in practice, even outperforms the older version in almost every way—or at least matches it. What drawbacks that were typical of last year’s model have been fixed? This is a review of Angwatt F1 New.
Where to buy the Angwatt F1 New?
Angwatt F1 New is currently available on Banggood with delivery directly from the Czech warehouse. That means not only fast delivery in up to 5 business days, but also trouble-free shipping with no extra fees. In this article, you’ll always find the current price and any info about an extra discount.
Angwatt F1 New
CZ warehouse
TIPExpress delivery from the Czech warehouse with no customs duties and VAT.
This product will be delivered to you express from the local Czech warehouse. Delivery from Czechia usually takes 7-10 days and is handled by courier. On delivery, you don’t pay any additional fees—no customs duty and no VAT.
Specifications
| Model | ANGWATT F1 NEW |
|---|---|
| Tires | 10-inch tubeless tires |
| Maximum range | Approx. 50-70 km |
| Max speed | Approx. 40-50 km/h |
| Maximum load | Approx. 120 kg |
| Maximum climbing angle | ≤25° |
| Drive | Motor with power 1000 W (peak power) |
| Motor type | Brushless motor with Hall sensors |
| Battery | Lithium battery 48V 18.2Ah |
| Controller | 29A |
| Charging time | Approx. 8 hours |
| Construction material | Iron + aluminum alloy |
| Brakes | Dual disc brakes + electronic brake |
| Turn signal lights | Front and rear turn lamps |
| Suspension | Front and rear suspension |
| Lighting | Front light + side lights + rear light |
| Body dimensions | Approx. 119 x 70 x 117-135 cm |
| Dimensions when folded | Approx. 117 x 70 x 55 cm |
| Net weight | Approx. 27 kg |
| Weight including packaging | Approx. 30.5 kg |
| CE certification | Yes |
| Power-on method | Switch + NFC card |
Quality and package contents
The box was 35 kg and the courier handed it to us directly into our hands while we picked it up. We want to point out that you can carry the e-scooter up to higher floors yourself, probably without needing help. The e-scooter is packed in the box folded in half and has the handlebars and display detached so they won’t get damaged during transport. The polystyrene reinforcement and soft plastic films protected the e-scooter sufficiently during shipping, although we did notice a few minor scratches (as you can see in the photos). Still, it’s much better than what happened with Angwatt CS1, which arrived a bit battered.
The screen is plastic and you’ll basically scratch it as soon as you start handling it. There’s simply no way to avoid scratches on it. Assembling, putting together, and fine-tuning the e-scooter will take you about an hour. The package includes a compact set of screwdrivers and wrenches with which you’ll tighten all the screws. You’ll also find a brief user manual and a charging adapter with a power rating of 110 W in the box. The instructions, by the way, don’t include a more detailed assembly procedure. But the process was clear to us, and you’ll manage it too.
To wrap it up, you’ll also find two NFC key fobs here that are used to unlock the e-scooter. We’re glad the front light was already installed, and we didn’t have to deal with it ourselves as in the case of last year’s model. Installing the rear fender took us the longest due to poorer access to the screw holes. It’s not a very intuitive mounting, but in the end we managed it. The stand is located on the left side. The height at which the handlebar sits is optional – you can choose from three levels. We set ours to the highest one.
Construction, build quality, design, and lighting
Angwatt F1 New looks stylish and, given the price, it’s also very well built. It combines materials like an aluminum alloy, steel, and plastic. It’s durable and robust, weighing a reasonable 27 kg. You can also fit it into a standard three-person elevator. It’s very comfortable to handle, and locking it in the folded position is handled elegantly – much better than with the Angwatt CS1. This is done with the red lever and a steel safety pin next to it. The standing area is very large and wide. It’s made of plastic and, as you can see, it gets dirty rather easily. It has the scooter name on it.
Even though it’s a cheaper e-scooter, we’d rate the overall construction quality as above average. Sometimes something creaks, but again, it’s completely acceptable, and this one creaks noticeably less than the older model. We’re glad the manufacturer managed to make several construction optimizations and even significantly reduce the price. The damping is very effective, and you’ll feel its function as soon as you step onto the e-scooter. The shocks dampen impacts nicely when riding over rough terrain. Occasionally you can hear a quiet, crackling sound, but again, it happens much less often than with the older model.
The design of the Angwatt F1 New is boosted especially by the lights. Again, you get LED lights on the side, brighter lighting in the front, as well as rear brake indicators and turn-signal indicators. The front light is strong enough for riding around the city, but if you plan to ride this e-scooter at night on unlit sidewalks, we’d add something stronger, for example on the handlebars. As for the turn / brake lights, they’re less noticeable, and we somewhat doubt that drivers will spot them during the day.
Controls, unlocking, and display
Let's start with the button module located on the left side of the handlebars. As you can see in the manufacturer's picture, the “+” and “-“ buttons are used to change the gear. In fact, it's not a gear at all, but a power mode. There are “gears” 1 to 5 available. The higher the number, the higher the allowed top speed, which increases by roughly 10 km/h up to our tested maximum of 50 km/h. At higher levels, the e-scooter generally also accelerates more aggressively and briskly. Once the e-scooter has been riding at the maximum speed for a longer time within a given “gear”, you no longer need to hold the throttle lever, and you'll keep a constant speed. You deactivate it simply with the brake.
There is also a power button here, which is used to start the e-scooter – you have to press it and then bring the NFC card close to the display. Registering the card is very quick, and if you place it in the middle of the screen, everything is ready in about a second. On the Angwatt CS1, this was a problem. On that one, you'd have to circle the card around the display for several seconds before it was registered – terrible. The Angwatt F1 New fixes this shortcoming. With the “D/S” button, you can “put it in neutral” – in S mode, the e-scooter won't move after you press the throttle.
Finally, there are also controls for activating the lights and a horn that is quite loud. Under the module there is a sliding control for activating the turn signals – you need to slide it in the desired direction. When it is in the middle, the turn signals turn off. While indicating a change of direction, you'll hear a quiet beeping sound. On the right side of the handlebars there is a throttle lever. The brake on the left is the rear one, and the one on the right is the front one – so it's completely opposite to most bikes.
The display is made of plastic, and outdoors its brightness is so low that you can hardly see anything on it. Readability is also hindered by scratches, which appear on the screen almost immediately and were already there from the factory. Otherwise, this panel shows data such as speed, kilometers traveled since you started it, and overall since you first turned it on. You’ll also see the currently selected performance level, the chosen riding mode (D/S), the battery voltage, and a graphical indicator of the battery charge status. It isn’t very accurate, and when the charge level drops below 3 bars, the rest disappears fairly quickly.
If you let the e-scooter “rest” for a short time, the voltage rises again, and for example you can suddenly go from one bar to three – this is confusing, because after you start riding it drops again. Estimating the remaining range is therefore quite difficult, and you'll have to get used to it. The model we tested a year ago had the same weakness.
Power, range, and charging
What the Angwatt F1 New and the CS1 have in common is the motor power – 1000 W. But the difference in favor of the newer model is huge. We were very pleasantly surprised, because the CS1 couldn't handle steeper hills or gravel terrain. Although the F1 struggles a bit on such surfaces, it still gets up hills and over gravel at a decent speed – great stuff. The brakes are also a huge improvement, as they are stronger. Cornering is smooth, but when turning sharply right or pushing the e-scooter and turning the handlebars, you can hear a quiet rubbing sound, probably from the front brake disc. It can definitely be fixed.
We tested the e-scooter in milder spring weather around Poprad and the surrounding area. The temperature ranged from 12 – 20 °C and at most there was only a light breeze. The reviewer weighs 97 kg and the vehicle has a payload capacity of approximately 120 kg. Angwatt CS1 was bigger and could handle a much higher weight of up to 200 kg. In our opinion, however, 120 kg is enough and we didn’t notice any signs of overload. The 1000 W motor handled everything effortlessly. We took measurements using the built-in GNSS (GPS) localization system in Apple Watch Ultra via the WorkOutDoors app, which provides a nice overview of the route statistics.
Our first ride was on a 25 km loop, which included several challenging elevation changes – the climb amounted to up to 244 meters, which definitely put the e-scooter to the test. The good news, though, is that it handled all the steeper hills. We already had to push the Angwatt CS1, which we tested last year, on those very same hills. We completed the loop in one hour at an average speed of 24.45 km/h. We reached a top speed of 42.2 km/h. The ride started with five bars and 49.4 V – at this charge level, the e-scooter arrived (after a full subsequent charge, the voltage indicator showed 54.6 V).
After 6.5 km and conquering a longer steep section, we had 4 bars and 47.4 V. The e-scooter reported that we had covered 8.3 km, which is a difference of as much as 1.8 km versus reality. So the odometer on the e-scooter is inaccurate. The 6.5 km weren’t reported only by the watch – we also checked it on the maps and the numbers match. Then came a 4.2 km stretch with a mild climb and descent. We rode it at almost full speed – about 42 km/h. After this section, another bar disappeared and there were still 3 left.
The voltage was 46.4 V. After a 2 to 3 minute break, we noticed that the fourth bar was added back and the voltage increased to 46.9 V. We covered a total of 10.7 km, followed by a downhill ride and cruising on the flat – this part of the route is 13.7 km long. We were lucky that exactly at 24.4 km the e-scooter announced the end – instead of showing speed, the display showed E5, which means the traction battery is almost depleted. The voltage was 40.9 V and in this case you’re already riding at a speed of about 5 km/h. The e-scooter’s mileage counter showed 28.8 km, while in reality it was 24.4 km. Here we need to keep in mind that although the battery indicator at the start of the ride showed 5/5 bars, the voltage wasn’t at maximum, so in the ideal case we could probably still get a few more kilometers out of this more demanding route. 40 km would, in our view, be achievable under the same conditions.
The e-scooter charged for 10 hours. The charger adapter is bulky and has an LED charge-status indicator. It even includes active cooling, which you’ll probably be able to hear. We also like the redesigned charging port – this time the cover is screw-on, so it won’t fall off by itself. With 54.6 V and a full charge, we set off for a 14.77 km city ride with an average speed of 15.4 km/h and 89 m of elevation gain.
It was a loop, so during the ride we traveled the same number of meters up and then down. We completed the route in roughly an hour. At the end we still had 5 bars and a voltage of 51.1 V. The next ride was 8 days later, and after starting the e-scooter the voltage didn’t drop compared to the previous ride – if anything, it was higher. We started at 51.5 V. That pleasantly surprised us, because the e-scooter had been stored in a cold storage space – the weather worsened and testing was complicated by unexpected March snow. We rode for about an hour and a half through the city and nearby cycling paths at an average speed of 19.2 km/h and a 200-meter climb (followed by a descent).
After covering approximately 10 km, one battery bar disappeared from the indicator (48.9 V). Overall, we rode 31 km that day, and at the end we managed to drain the battery to 3/5 with a voltage of 45.5 V. We “finished off” the e-scooter 5 days later after riding 4 km + another 2 km with limited power due to low voltage, which we no longer recorded. As you can see, from three bars we got down to one significantly faster than from five bars to three.
It was a ride in the city with an average speed of 16.3 km/h. All on flat ground. As a result, that comes to about 52 km of city riding, including sections on paths intended for cyclists, which we covered on the highest performance mode. In our opinion, that’s solid, especially when you consider that tests used to take place also in hilly terrain. The range claimed by the manufacturer is 50 – 70 km. So it falls on the lower end of this theoretical limit, which is relatively wide.
Angwatt F1 New: Final rating
Angwatt F1 New has our unequivocal recommendation. It’s a great e-scooter with which you’ll definitely enjoy plenty of kilometers and it won’t cost you much either. For this price, it’s a very nice deal. It has high performance, a good range, and dynamic riding characteristics. The build quality is better, the brakes are more effective, and it was possible to reduce both weight and dimensions. Plus, it’s a relatively well-packable companion for both the city and certain types of terrain.
Once again, the downside is the display with low brightness that’s prone to scratches. We also consider the rather confusing way the remaining battery energy is shown, and the incorrect calculation of the distance traveled. Everything else was more or less minor, and the positives clearly outweigh the negatives. In the price category up to 500 euros, it’s currently one of the hottest e-scooters—we definitely recommend it.
If you’re looking for an e-scooter with still decent performance (1000 W and 50 km/h), a weight of less than 30 kg for easier handling, better suspension (front fork and rear shock damping), or a battery around 20 Ah, the Angwatt F1 New is definitely a choice you won’t regret. For this money, it would be hard to find anything better.
If our review convinced you to buy this e-scooter, use the coupon from our price box and from the seller Banggood.
Angwatt F1 New
CZ warehouseTIPExpress delivery from the Czech warehouse with no customs duties and VAT.
This product will be delivered to you express from the local Czech warehouse. Delivery from Czechia usually takes 7-10 days and is handled by courier. On delivery, you don’t pay any additional fees—no customs duty and no VAT.
Follow the China Planet website, sign up for our monthly newsletter, and make sure you also follow our Facebook page, the group All from EU warehouses, and join our Telegram—where we add the best deals and coupons from China day after day.
Don’t miss the best coupons 📩
Subscribe and we’ll email you new coupons before they expire. We only send it once a month — no spam.
